Paint Coverage & Gallon Calculator

Estimate how many gallons of paint you need based on room dimensions and number of coats. Includes 5-gallon bucket count and wall area. Free paint coverage calculator for contractors.

Enter the room length, width, and ceiling height, then set the number of coats. The calculator figures the wall surface area, multiplies by your coat count, and divides by 350 sq ft per gallon — the typical coverage for interior latex on a primed surface.

What this paint calculator estimates

The paint calculator estimates the number of gallons of interior paint required to coat the walls of a single rectangular room, plus the equivalent number of 5-gallon buckets for larger jobs. It reports the wall surface area, multiplies it by your chosen number of coats, and divides by a fixed coverage rate of 350 square feet per gallon — the typical yield for standard interior latex on a smooth, primed surface. Enter the room length, width, and ceiling height in feet, set the number of coats, and the tool returns gallons, 5-gallon buckets, and the wall area it based the math on.

How to measure and enter each input

  1. Measure the room length (feet): the longer floor dimension, wall-to-wall at the baseboard.
  2. Measure the room width (feet): the shorter floor dimension, perpendicular to the length.
  3. Measure the ceiling height (feet): floor-to-ceiling at the tallest wall. For a flat ceiling use the wall height; for a vaulted or sloped ceiling, use the average height or calculate each slope separately and add the results.
  4. Set the number of coats: 1 for a same-color refresh, 2 (standard) for an even finish, 3 for a dramatic color change or covering repaired patches.

Surface area and the wall-area formula

The calculator figures wall surface area from the room perimeter and ceiling height. The formula is wall area = 2 × (length + width) × ceiling height. This is the room perimeter (length + width + length + width) multiplied by the height of the walls. It gives you the total flat wall surface that will receive paint, before any adjustment for openings or extra coats.

This calculator covers the walls only — it does not include the ceiling. If you are painting the ceiling too, add the ceiling area (length × width) to the wall area before dividing by coverage, or run the math a second time treating the ceiling as a separate flat surface.

Openings (doors and windows)

The calculator does not subtract doors and windows from the wall area. For most rooms the paint saved by openings is small relative to the total wall surface, and the leftover paint covers touch-ups and a second coat on patched areas. If a room has unusually large openings — a wall of windows, a wide opening to another room — you can subtract their area manually before dividing by coverage: opening area = height × width of each door or window. Most pros simply keep the full wall area and use the surplus for touch-ups, because running short mid-job costs far more than a leftover quart.

Coats and why they multiply the area

Each coat covers the full wall surface, so the total paint area is the wall area multiplied by the number of coats. The calculator applies this automatically: total paint area = wall area × number of coats. Two coats is the standard for an even, durable finish; one coat works only for a same-color refresh over a sound surface; three coats is wise for a dramatic color change, painting over a repaired patch, or covering a dark wall with a light color.

Coverage per gallon and surface conditions

The calculator uses a fixed coverage rate of 350 square feet per gallon — the typical yield for standard interior latex on a smooth, primed surface. Real coverage varies with the surface and the paint, so treat 350 sq ft/gal as a planning average, not a guarantee:

Because the tool’s coverage rate is fixed at 350 sq ft/gal, adjust for a different surface by scaling the result: for a porous surface at roughly 280 sq ft/gal, multiply the calculator’s gallon count by 350 ÷ 280 (about 1.25) and round up. Prime porous surfaces first — primer is cheaper than a third finish coat and gives a more accurate final coverage.

Waste and purchase quantities

The calculator does not add a separate waste factor, because paint waste is small and the rounded-up gallon count usually covers it. When you buy, round the gallon total up to the next whole gallon (the tool already reports gallons to one decimal place and rounds the 5-gallon bucket count up). Then add a touch-up quart beyond the calculated amount for future scuffs and repairs — matching the exact color later can be difficult, so buy the touch-up paint from the same batch at the same time.

For larger jobs, the 5-gallon bucket count is usually cheaper per gallon than single gallons. As a rule of thumb, once you need three or more gallons, a 5-gallon bucket is the better buy. The calculator shows both quantities so you can choose.

Formulas and units

Worked example

Paint the walls of a 20 ft × 15 ft room with a 9 ft ceiling in 2 coats — the calculator’s default values:

The calculator displays 3.6 gallons, 1 five-gallon bucket, and 630 sq ft of wall area — matching the math above. Buy 4 gallons (round 3.6 up) or one 5-gallon bucket plus a touch-up quart. If the walls are unprimed or textured, scale the 3.6 gallons by about 1.25 to roughly 4.5 gallons, then round up to 5.

Common mistakes

Frequently asked questions

Does this calculator include the ceiling?

No — it covers the walls only. To paint the ceiling, add the ceiling area (length × width) to the wall area before dividing by 350, or run the ceiling as a separate calculation.

Why is coverage fixed at 350 sq ft per gallon?

350 sq ft/gal is the typical yield for standard interior latex on smooth, primed drywall. The tool uses it as a planning average. For porous, unprimed, or textured surfaces, scale the gallon result up by about 25% (multiply by 1.25) and round up, or prime the surface first so the finish coat hits the standard rate.

Should I subtract doors and windows?

For most rooms, no — the paint saved by openings is small and the surplus covers touch-ups. For a room with unusually large openings, subtract each opening’s area (height × width) from the wall area before multiplying by coats. Most pros keep the full wall area and use the extra paint for a second coat on patched spots and future touch-ups.

How this calculator works

Tips for accurate estimates

Frequently asked questions

How much paint do I need for a room?

Divide the total wall square footage (2 × (length + width) × height) multiplied by the number of coats by the paint coverage per gallon. Standard interior latex covers roughly 350 sq ft per gallon. This calculator uses 350 sq ft/gal.

Does this calculator include the ceiling?

No — this paint calculator covers the walls only. If you are painting the ceiling too, add the ceiling area (length × width) to the wall area before dividing by coverage.

How many coats should I plan for?

Plan for two coats as a standard for an even, durable finish. Use one coat only for a refresh of the same color, and three coats for dramatic color changes or covering repaired patches.

More material calculators

Related checklist

Pair this estimate with a trade-specific inspection checklist for a clean, verified close-out: Painting punch list checklist.

More free contractor resources

Create your free QuickPunch account →

Related resources

Go to QuickPunch home →